Labs Package Management under Linux Basic

DevOps
#1

1.)In the 2nd question I used the same command as in hint but still showing the same error

/
thor@host01 /$ sudo rpm -i /opt/ftp-0.17-67.el7.x86_64.rpm
error: open of failed: No such file or directory
error: open of failed: No such file or directoryerror: open of 404 failed: No such file or directory
error: open of Not failed: No such file or directory
error: open of Found failed: No such file or directory
error: open of failed: No such file or directory
error: open of

Not failed: No such file or directory
error: open of Found

failed: No such file or directory
error: open of

The failed: No such file or directory
error: open of requested failed: No such file or directory
error: open of URL failed: No such file or directoryerror: open of was failed: No such file or directory
error: open of not failed: No such file or directory
error: open of found failed: No such file or directory
error: open of on failed: No such file or directory
error: open of this failed: No such file or directory
error: open of server.

failed: No such file or directory
error: open of failed: No such file or directory
/

2.) Similarly in the 8th question again the error pops up
*/
thor@host01 /$ sudo yum install -y ansible-2.4.2.0
Loaded plugins: fastestmirror, ovl
Determining fastest mirrors
epel/x86_64/metalink | 32 kB 00:00:00

  • base: mirror.softaculous.com
  • epel: mirrors.n-ix.net * extras: mirror.checkdomain.de
  • updates: mirror.softaculous.com
    base | 3.6 kB 00:00:00
    epel | 4.7 kB 00:00:00
    extras | 2.9 kB 00:00:00
    updates | 2.9 kB 00:00:00
    (1/7): base/7/x86_64/group_gz | 153 kB 00:00:00
    (2/7): epel/x86_64/updateinfo | 1.0 MB 00:00:00
    (3/7): updates/7/x86_64/primary_db | 168 kB 00:00:00(4/7): extras/7/x86_64/primary_db | 190 kB 00:00:00
    (5/7): base/7/x86_64/primary_db | 6.1 MB 00:00:00
    (6/7): epel/x86_64/group_gz | 95 kB 00:00:00
    (7/7): epel/x86_64/primary_db | 6.8 MB 00:00:00
    No package ansible-2.4.2.0 available.
    Error: Nothing to do
    /*

What am i doing wrong here?

#2

Hi ayushjain ,
The problem is solved now, kindly check again.
We do apologize for any inconvenience.